Dc 12-24v 4-20ma Load Cell Amplifier Module Electrical Accessories

Housing and wire connectors are waterproof design, good sealing, suitable for harsh environments
Look beautiful, durable, anti-jamming performance
Ultra- high-precision op amp circuit, high accuracy, good stability
The power supply has reverse polarity protection, surge protection, overcurrent protection
Suitable for weighing, pull pressure, torque, and other strain sensor.

# DC 12-24V 4-20MA Load Cell Amplifier Technical Parameters:
Working voltage: DC 12-24V
Output signal: voltage (0-5V, 0-10V, 1-5V, ± 5V) 4-20ma
input signal:sensor sensitivity 2.0MV/V
output incentive:5V(E+)
Operating temperature range: -20 - 80
Operating Humidity: 10% RH-90% RH (non-condensing)
Accuracy: better than 0.1% F.S
Precision is better than 0.05% F.S

Gear selection:dial switch turn OFF , V0 output 0-5v , 1 turn to ON V0 output 0-10V
1 and 2 both turn to OFF VO output 0-5v IO output 4-20MA

# DC 12-24V 4-20MA Load Cell Amplifier About debugging:
1 zero adjustment
First of all, make the system is in the idle state, adjust the marking "ZERO" potentiometer to adjust the zero offset. The multimeter is used to measure the output voltage or current, let show a value as close as possible to the zero value display. Or change the magnification zero change will become big.
2 gain adjustment
The system loading a certain weight value (the recommended range: 80% ~ 100% FS), the calculation of the output current value according to the load weight and the maximum weighting value relation, using the digital multimeter monitoring output, potentiometer to adjust amplifier gain spin labeled "SPAN".
3 the retest
The system is in the idle state, measuring the zero output; loading a certain weight value, output voltage measurement whether fluoride expectation magnification If not, repeat steps 1, 2 adjust again.

# DC 12-24V 4-20MA Load Cell Amplifier Package:
1 x Load Cell sensor Amplifier Transmitter

Here is our Market
1. We accept OEM/ODM service.
2. We accept whole bulk dropshipping order.
3. Quick delivery time.

FAQ
Q1. What is your lead time?
A: We will ship out the goods within 5 working days after received the payment, finally depends on quantities.
Q2. What is your sample policy?
A: Welcome to ask sample, we can send out the sample within 2 days, please contact us.
Q3. Do you test all your goods before delivery?
A: Yes, we have QC department we will do 100% test before the shipment.
Q4. What is your warranty?
A: Our warranty is 90 days after goods have been received.
Q5. What's the MOQ for your products?
A: The MOQ for each product is different, but we also accept small order, welcome to contact us.
Q6. How do I pay for the order?
A: You can draft an order by yourself and pay it , or contact us pay by TT , Paypal, Alipay, Wechat etc.
Q7. Do you accept the whole bulk dropshipping order ?
A: Yes, please contact us.